πΈ 3% Cash Back | Cash, Check, Wire or Zelle πΈ
SAVE 3%
The Midea 5 Ton Central Coil Heat Pump AC is your go-to solution for efficient year-round comfort! This 60,000 BTU ducted split package pairs a multi-poise evaporator coil with a hyper-heat inverter outdoor unit, delivering 14.9 SEER2 and reliable heating down to -13 F. The included programmable wired controller has built-in WiFi and Dual Fuel Mode, and the coil fits virtually any furnace in upflow, downflow, or horizontal orientation. Factory warranty included for peace of mind.
This 60,000 BTU central coil system pairs a multi-poise evaporator coil with a hyper-heat inverter outdoor unit, giving you a heat pump replacement path for an existing furnace without replacing the furnace itself. The coil is designed to work with virtually any furnace (some restrictions apply) and mounts vertically upflow or downflow, or horizontally left or right, so it fits existing duct layouts. It runs on next-generation R454B refrigerant with a factory-installed leak mitigation system, and the coil interface is powered from the furnace's 24V AC.
The outdoor unit heats down to -13°F and cools down to -13°F outdoor ambient, making it a primary heat source in cold climates without a backup. The included wired controller is programmable with built-in WiFi and a Dual Fuel Mode for coordinating with a furnace, and the system carries a factory-installed 24V interface for third-party thermostat compatibility. Maximum heating capacity is 37,800 BTU/h at 5°F, rated heating is 49,000 BTU/h at 47°F, and rated cooling is 51,000 BTU/h at 95°F.
| Technical Specifications | |
|---|---|
| System Type | Central Coil Split Heat Pump (Furnace-Replacement Coil) |
| Capacity | 60,000 BTU (5 Ton) |
| Outdoor Model | D5CURAH60AAK |
| SEER2 Rating | 14.9 |
| EER Rating | 8.5 |
| HSPF Rating | 8.1 |
| Refrigerant | R454B |
| Voltage | 208/230V |
| Min Heating Temperature | -13°F |
| Max Heating Cap @ 5°F | 37,800 BTU/h |
| Rated Heating Cap @ 47°F | 49,000 BTU/h |
| Rated Cooling Cap @ 95°F | 51,000 BTU/h |
| Installation Type | Multi-Poise — vertical upflow/downflow, horizontal left/right |
| Coil Features | Factory-installed leak detection system; secondary drain; conventional line set; constant air motor/blower; anti-corrosive fin coating |
| Outdoor Features | Variable speed inverter; factory-installed base pan heater; factory-installed crankcase heater; built-in 24V interface; low voltage controls; reverse fan operation; condenser high-temp protection; quiet operation; anti-corrosive fin coating |
| Controls Included | Wired controller with built-in WiFi and Dual Fuel Mode; factory-installed 24V interface for third-party thermostat compatibility |
| AHRI Certified | Yes (MX Coil & DX Coil certifications available) |
| Warranty | 7yr Compressor / 5yr Parts (Registration Required) |
Works with virtually any furnace (some restrictions may apply), giving you a heat pump path without replacing your existing furnace.
Mount vertically upflow or downflow, or horizontally left or right — a secondary drain supports every orientation for existing duct layouts.
The wired controller's Dual Fuel Mode coordinates heat pump and furnace operation so each runs where it's most efficient.
The included programmable wired controller has built-in WiFi for app control, and the coil interface is powered from the furnace's 24V AC.
The coil ships with a factory-installed leak detection system and works exclusively with R454B refrigerant.
Precise inverter control maintains a stable, constant room temperature while reducing sound level and saving energy.
Factory-installed base pan heater and crankcase heater support reliable cold-weather startups and operation down to -13°F.
A factory-installed 24V interface on the coil allows compatibility with most third-party thermostats.
No weight limits. No dimensional charges. Free freight delivery on every order.
Every unit ships with the full manufacturer warranty — no third-party coverage needed.
We cut out the middleman. Compare us against any competitor — we back our pricing.
Shop Pioneer, Daikin, Midea, MRCOOL, Cooper & Hunter, and more in one place.
Call or email our team. We answer specs, sizing, and installation questions — not scripts.
Pay by check or bank transfer and get 3% back — one of the easiest savings available.
*Warranty registration REQUIRED — Register Your System
No. This is a traditional line-set system — brazing, evacuation, and charging the refrigerant circuit must be performed by an EPA 608-certified technician. The manufacturer's warranty also depends on professional installation and online registration via the link in the warranty section above. Our team can answer sizing and line-set questions before you order — just call or email.
No. The coil is designed to work with virtually any existing furnace (some restrictions may apply) and mounts in line with your current ductwork in upflow, downflow, horizontal left, or horizontal right orientation. It's a way to add heat pump capability to a furnace-based system without a full furnace replacement. Confirm compatibility with our team before ordering.
Dual Fuel Mode lets the system coordinate the heat pump and your furnace, running whichever is more efficient at a given outdoor temperature. That typically means the heat pump handles mild and moderate weather while the furnace covers the coldest stretches, though your installer will configure the switchover point based on your climate and utility rates.
The system is rated down to -13°F outdoor ambient and delivers 37,800 BTU/h at 5°F versus its 49,000 BTU/h rating at 47°F — roughly 77% of rated heating capacity at that cold-climate benchmark, so there is some taper in extreme cold. A Manual J load calculation is the right way to confirm the system meets your home's heat load at your local design temperature — our team can help with sizing before you order.
| Title | Midea 60K-Btu 14.9 SEER2 Central Coil Mini Split Heat Pump (-13Β°F) 8.5 EER/8.1 HSPF (R454B) |
|---|---|
| Brand | Carrier Midea North America |
| Category | 60000 Btu | 5 Ton | 2000-2500 Sq Ft |
| SKU | D5CURAH60AAK/Coil |
| Condition | new |
| UPC | 810150840629 |
| MPN | D5CURAH60AAK |
I wanted a dependable cooling system for a large space, and this Midea 60K BTU unit seemed like a solid choice. The setup went smoothly, and once everything was running, the whole area felt much more comfortable. I also like having a central system instead of dealing with separate units in different rooms. It has been a practical upgrade that makes the space easier to enjoy every day.
My old five-ton AC unit shook the backyard fence whenever it kicked on. This Midea inverter? It just sits against the siding and hums like a happy cat. Inside, the new coil dropped right onto my old furnace setup without a fight. No massive remodel required. Now the air doesnβt blast hot and cold in waves anymoreβthe variable speed just keeps the whole house at one perfect, steady number. It even breathes easy down in the deep winter freezes. Itβs the invisible, whispering muscle my house always needed.
I wanted a dependable cooling system for a large space, and this Midea 60K BTU unit seemed like a solid choice. The setup went smoothly, and once everything was running, the whole area felt much more comfortable. I also like having a central system instead of dealing with separate units in different rooms. It has been a practical upgrade that makes the space easier to enjoy every day.
Randy D. · 2026-10-09My old five-ton AC unit shook the backyard fence whenever it kicked on. This Midea inverter? It just sits against the siding and hums like a happy cat. Inside, the new coil dropped right onto my old furnace setup without a fight. No massive remodel required. Now the air doesnβt blast hot and cold in waves anymoreβthe variable speed just keeps the whole house at one perfect, steady number. It even breathes easy down in the deep winter freezes. Itβs the invisible, whispering muscle my house always needed.
M. Paras · 2026-07-04
Mini Split Warehouse offers a wide selection of ductless air conditioners and split heat pumps, providing free shipping nationwide.
(877) 770-3548
